G9 LED Light The Role
LED is the English light emitting diode (abbreviation), its basic structure is an electroluminescent semiconductor material chip, with silver glue or white plastic curing to the bracket, and then use a silver wire or gold wire to connect the chip and circuit board , Surrounded by epoxy resin seal, play a role in protecting the internal core, and finally install the shell, so g9 LED lamp seismic performance is good. Application areas related to mobile phones, table lamps, home appliances and other daily appliances and machinery production. G9 LED energy saving lamp as a new type of lighting source, with energy saving, health, G9 LED Light environmental protection and long life of the salient features, by the majority of the people's favor and the country's strong support.
LED (Light Emitting Diode), a light-emitting diode, G9 LED Light is a power can be converted into visible light solid-state semiconductor devices, it can be directly into electricity into light. G9 LED lamp heart is a semiconductor chip, one end of the chip attached to a bracket, G9 LED Light one end is negative, the other end connected to the power of the positive, so that the entire chip is encapsulated by epoxy resin.
Semiconductor chip consists of two parts, part of the P-type semiconductor, in which the dominant hole inside, the other end is the N-type semiconductor, mainly electronic here. But when the two semiconductors are connected, they form a P-N junction. When the current through the wire acting on the chip, the electron will be pushed to the P area, in the P area with the hole in the electronic composite, G9 LED Light and then will be issued in the form of photon energy, which is the principle of LED light. And the wavelength of light is the color of light, is formed by the formation of P-N knot material.
LED can be issued directly red, yellow, blue, green, blue, orange, purple, white light.
The initial LED used as instrumentation indicator light source, and later a variety of light color LED traffic lights and large area display has been widely used, resulting in a very good economic and social benefits. To 12-inch red traffic lights, for example, in the United States was originally used long life, low light performance 140 watts incandescent light as a light source, it produces 2000 lumens of white light. G9 LED Light After the red filter, the light loss of 90%, leaving only 200 lumens of red light. In the newly designed lamp, Lumileds uses 18 red LED light sources, including circuit losses, including a total of 14 watts of electricity, can produce the same light effect. Automotive lights are also important areas of LED light source applications.
For general lighting, people need a white light source. 1998 white LED development success. This g9 LED lamp is the GaN chip and yttrium aluminum garnet (YAG) made together. GaN chip with blue light (λp = 465nm, Wd = 30nm), high temperature sintered Ce3 + -based YAG phosphor is excited by this blue light after the yellow light, the peak 550nLED lamp m. The blue LED substrate is mounted in a bowl-shaped reflective cavity, covering a thin layer of resin mixed with YAG, about 200-500 nm. The blue part of the LED substrate is absorbed by the phosphor, and the other part of the blue light and phosphor yellow light mixed, you can get white.
For InGaN / YAG white LED, by changing the chemical composition of YAG phosphor and adjust the thickness of the phosphor layer, you can get the color temperature of 3500-10000K colored white light. This way through the blue LED white light, simple structure, low cost, high technology maturity, so the most use.